In-line fuse holder specifications:

• AMERICAN MADE
• 14 AWG Red Wire
• Water Resistant
• 10" Loop
• Attached Rubber Cap
• ATC/ATO Blade Fuse Compatible
• 100’s In Stock

In-line fuse holder specifications:

• AMERICAN MADE
• 12AWG Yellow Wire
• Water Resistant
• 10" Loop
• Attached Rubber Cap
• ATC/ATO Blade Fuse Compatible
• 1,000’s In Stock

If you are like a lot of our OEM customers, then you know the value of cutting labor costs when the opportunity arises. The Scotchlok 314 by 3M is that opportunity. No more stripping each wire, using up to three heat shrink butt connectors, and using costly heat guns. With the 314 you simply insert two or three non-stripped wires completely into the connector. The clear plastic form allows you to look inside and check that your wires are all the way in. Then using a pair of slip joint pliers, drive down the blue cap so that it is flush with the clear connector body. That's it! These are in stock and come in boxes of 1000. Free Samples are available upon request. Please give us a call today and see the advantages for yourself.

Smart Strip®

Mil-202, FAR 25, FMVSS 302,
VW-1, FR-1 Approved
Economical & Easy to Install
Cut & Abrasion Resistant
Expands up to 150%
Resists Gasoline and Engine
Chemicals
Temp Range -75°C to 125°C
Melt Temp 250°C

“Your Complete Cable Solution”

Peterson officially opened its doors in 1945 as a small company specializing in manufacturing safety lighting for the automotive aftermarket. Over the past 60+ years, Peterson has become an industry leader and introduced a host of innovations including stainless steel housings that won’t rust, the Vibar® socket and Piranha® Light Emitting Diodes (LEDs).

Through the years, Peterson has grown from a small, family business to a multi-industry corporation. During this transformation, leadership continually focused on creating the highest quality product possible. This core value is perhaps best reflected in the fact that Peterson was one of the first 40 manufacturers in the entire United Sates to obtain ISO 9001/ QS9000 registration.

Specifically, Peterson was the very first US vehicle safety lighting manufacturer to obtain this important registration that lets customers know that their quality systems meet a standard of excellence that is internationally understood and accepted.

Quality is also why Peterson builds products that not only meet federal specifications, but also exceed them by 25% and why they boast the industries lowest return rate on a line of over 2,000 products. Please give BABSCO’s knowledgeable OEM sales staff a call to see how BABSCO and Peterson Mfg can improve your new or existing products.

As the leader in circuit protection, the Littelfuse portfolio of brands is backed by decades of design and manufacturing expertise, plus the industry’s most experienced
technical support. Littelfuse products are vital components in virtually every product
that uses electrical energy, including: automobiles, computers, consumer electronics, handheld devices, industrial equipment, and telecom/datacom circuits.

Companies around the world have come to rely on Littelfuse’s commitment to providing the most advanced over-current and over-voltage solutions and technical expertise. It’s this focus that has enabled Littelfuse to become the world’s leading provider of circuit protections solutions. Please stop in or give BABSCO a call today to see how Littelfuse can solve your manufacturing dilemmas.

With a 60-year history of leadership, Tyco Electronics is a $13.5 billion global provider of engineered electronic components for thousands of consumer and industrial products, network solutions and systems for telecommunications and energy markets, wireless systems for critical communications, radar and defense applications; and undersea telecommunication systems. Tyco Electronics designs, manufactures and market products for customers in industries ranging from automotive, appliance, aerospace and defense to telecommunications, computers and consumer electronics. They manufacture nearly 500,000 products – all backed by approximately 94,000 committed employees with a singular commitment to bringing a performance advantage to every technology, product and service we provide.

DSG-Canusa

DSG-Canusa is the complete source for heat shrink products and related technology. Their product offering includes Polyolefin, Fluoropolymer, Elastomer, and PVC heat shrink based materials in thin, medium, and heavy walled tubing as well as heat shrink accessories and equipment. New products are continuously being developed to meet industry requirements as well numerous military specifications. Moreover, a commitment to develop unique solutions for customer applications has earned DSG-Canusa a reputation of excellence in customer satisfaction.

With manufacturing facilities located in five countries and sales offices through out the world, Canusa truly is an international corporation ready to meet what ever challenges customers might have. Give us a call today and see how BABSCO and Canusa can work with you to solve your heat shrink needs!

ACT - Fastening Solutions

Whether you are looking to fasten cables, wires, or secure miscellaneous items from moving, Advanced Cable Tie or ACT has the product you need for your particular job. Quality focused ACT has been ISO-9002 registered since 1999 and recently acquired an upgrade to ISO-9001:2000 by the Quality Management Institute. Additionally all ACT products meet the UL (1565), and CSA (C22.2) safety standards in both the U.S. and Canada, as well as U.S. Military (Mil-S-23190) standards so safety and quality are never a concern.

Produced in a fully automated state-of-the-art molding facility, ACT manufactures superior cable ties that combine the lowest insertion force with the highest tensile strength.

Give our OEM sales department a call today to see how Advanced Cable Ties can improve your product or project.

Connect With Molex

Molex designs and manufactures a wide variety of reliable, high-quality products to best meet your electrical and industrial connection needs. From terminals and splices ranging from 26 AWG through 500 MCM to a host of quick disconnects and other relate products Molex has you covered. Molex manufactures their terminals and splices to the standards of the National Electrical Manufacturer's Association (NEMA) and meet or exceed the test requirements of American, Canadian, and International standards. With locations and resources through out the world, you can be assured of the best quality possible when using Molex parts for your OEM needs! Please give us a call today to request your free samples. Click here to visit Molex® online.

Sanyou Relay

Relays for Advanced Technology

Sanyou Relays produce electromechanical relays of various types ranging from automotive, home appliances, and air conditioning systems. The company’s 540,000 square feet of overseas production facilities produces over 90 million pieces annually making them the second largest producer of relays in China today. Add that to their ISO 9001, ISO 14001, and TS16949 certifications and you can rest assured that you are receiving the highest quality possible. Please call us today and request your free samples. Click here to visit Sanyou Relay online.